Page 1 of 1
Getting rid of rust on JCR cowbells
Posted:
Wed Oct 12, 2011 7:36 pm
by jesse_velazquez
Hi everyone.
I have an old bongo bell and new timbale bells that I brought from Cali's shop in the Bronx. The new ones are obivously fine, but the old bongo bell I have had for almost 20 years and it very rusty. I didnt know the best method to cleaning these bells, and perserving the new bells that have no rust. Any suggestions???
Re: Getting rid of rust on JCR cowbells
Posted:
Wed Oct 12, 2011 11:53 pm
by OLSONGO
Deep in vinegar overnight the wash with a scrubbing sponge , then rubb some oil on it ..that will prevent the rust.
peace
Olsongo
Re: Getting rid of rust on JCR cowbells
Posted:
Thu Oct 13, 2011 12:29 am
by b0ng0
JESSE: Rust is always gonna be a problem with cowbells,especially a bongo bell. What I like to do is get a piece of light sandpaper and sand it down to remove the rust, depending on how much rust you have, that's the grit of sandpaper you'll need..
Hope this helps..
Re: Getting rid of rust on JCR cowbells
Posted:
Thu Oct 13, 2011 2:33 am
by Anonimo
POST REMOVED BY THE AUTHOR
Re: Getting rid of rust on JCR cowbells
Posted:
Fri Oct 14, 2011 4:03 pm
by jesse_velazquez
Thanks for your suggestions. I will probably try all on my different bells to see which is the best method.
Re: Getting rid of rust on JCR cowbells
Posted:
Sat Oct 15, 2011 1:52 pm
by Anonimo
POST REMOVED BY THE AUTHOR
Re: Getting rid of rust on JCR cowbells
Posted:
Mon Oct 17, 2011 7:40 pm
by jesse_velazquez
good to know. Do you know if it would alter the sound since I am sanding it??
Re: Getting rid of rust on JCR cowbells
Posted:
Tue Oct 18, 2011 8:52 pm
by Anonimo
POST REMOVED BY THE AUTHOR
Re: Getting rid of rust on JCR cowbells
Posted:
Tue Oct 18, 2011 8:52 pm
by Anonimo
POST REMOVED BY THE AUTHOR
Re: Getting rid of rust on JCR cowbells
Posted:
Tue Oct 18, 2011 9:31 pm
by jesse_velazquez
good to know. Gracias Leedy.